$ 1,140/pair
The ZERO-Box is simply my speaker impedance multiplying autoformer installed in a beautiful hand crafted lacquer finished in either a solid Cherry or Birdseye Maple wooden box with African Ebony wood accents on the four corners. The connections are available on Cardas binding posts allowing you to use your favorite speaker cables. The single pair of binding posts are the connections that go to the speaker. The quad set of binding posts allow you to choose the multiplication factor depending on which two of the four are connect back to the amplifier. Polarity passes through the box: Left in-Left out, Right in-Right out.
Impedance Multiplication Factors:

2x = Connect the inner pair of the Quad set to the amplifier
3x = Connect the Left side inner, and Right side outer to amplifier
4x = Connect the outer pair of the quad set to the amplifier
For example: a 4 ohm speaker can be made to look like a 8,12, or 16 ohm speaker.

The ZERO-Box is typically placed close to the speaker. A short set of high performance pure 12 gauge Copper jumper leads are use to connect the ZERO-Box to the speaker. These extremely neutral and transparent sounding leads are custom made to your needed length, and include spade end connections.The ZERO-Box is typically placed close to the speaker. A short set of high performance pure 12 gauge Copper jumper leads are use to connect the ZERO-Box to the speaker. These extremely neutral and transparent sounding leads are custom made to your needed length, and include spade end connections.

More Information:
Multiplication Factors>>>Multiplication Factors>>>Bi-Wiring Option>>> More technical information>>>

Website Developed by: IntraVision Software, Inc. 2005

zerohead_r2_c1.gif zerohead_r2_c2.gif zerohead_r2_c3.gif zerohead_r2_c4.gif zerohead_r2_c5.gif zerohead_r2_c6.gif